Fluent by Technology Coast Partners

How Much Does Sales Order Automation Cost on Epicor Kinetic?

What drives the price of sales order automation, Fluent's published pricing, a worked monthly cost at three order volumes, and the labour it pays back, using the ROI calculator's arithmetic.

Gonzalo Nuñez

Gonzalo Nuñez

Chief Technology Officer


How Much Does Sales Order Automation Cost on Epicor Kinetic?

On Epicor Kinetic, price sales order automation against Fluent first: paid plans start at $600 a month on published usage credits, with unlimited users and agents, no implementation project and a 30-day trial. A sales order draws about 35 credits, so the Starter plan's 12,500 monthly credits cover roughly 357 orders. Most order-entry vendors quote on request instead, so ask each for a twelve-month total on your own volume before comparing.

This guide covers what drives the price, Fluent's pricing in plain words, a worked monthly cost for a hypothetical manufacturer at three order volumes, and the labour side, worked the way the ROI calculator works it.

What drives the price

Order-entry tools charge on different units, so two quotes for the same orders can grow in different directions as you do. Compare the model before the number.

  • Per credit or per document. The bill follows the orders you process. Fluent bills usage credits, where each document draws credits for the work it takes. Lowki publishes per-credit pricing in pounds, one credit per order line. Ask what counts: a resent PO, a rejected order, a long multi-line order.
  • Per order line. The bill follows line count, so a distributor with long orders pays more than a manufacturer with short ones at the same order count.
  • Quote only. Conexiom, WizCommerce, Ordermatic and Esker did not publish prices on their websites as of November 2026. Ask for the model before the demo.
  • Implementation and services. Some products need a scoped project, a services agreement or per-customer format setup. Get that figure in writing.
  • The ERP connection. Ask whether it is included, what it installs in or next to Epicor, and who maintains it through Kinetic upgrades.

Fluent's pricing in plain words

Every document and every chat draws from one credit balance. You choose a plan sized to your volume, and the more you commit, the less each credit costs.

Starter$60012,500$6,000About 357
Growth$1,20027,000$12,000About 771
Scale$2,40057,000$24,000About 1,628
  • Credits per document. The pricing page estimates about 35 credits for a sales order, quote or purchase order, and about 25 for a supplier invoice or pack slip. Billing meters each document at the work it actually takes, so a long order draws more than a short one.
  • Above your plan, credits cost $0.05 each, added by hand or by auto-refill.
  • Unused credits. Included credits reset each billing period; on an annual plan the pool spans the whole year. Purchased credits never expire.
  • Users and agents are unlimited on every plan, so approvers in pricing, credit and customer service cost nothing extra.
  • Onboarding. No implementation project. Technical setup is one 30-minute call, a second session trains the people who will review orders, and a customer success manager follows.
  • Trial. Invited teams start on a 30-day trial on one agent, with a credit balance included.

Worked monthly cost

The manufacturer below is hypothetical and its volumes are assumptions. The credits use the pricing page's estimate of about 35 per sales order, and the plans use Fluent's published prices.

2007,000Starter$600$3.00
40014,000Starter plus 1,500 credits at $0.05$675$1.69
80028,000Growth plus 1,000 credits at $0.05$1,250$1.56
  • Starter's $600 is a monthly minimum. At 200 orders, 5,500 of the 12,500 credits go unused. Adding quotes or supplier invoices to the same balance fills the plan without raising the bill.
  • Top-ups beat moving up a plan until about 24,500 credits, roughly 700 sales orders a month, where Growth becomes the cheaper choice.
  • Annual plans cost less for steady volume, and pool credits across the year, so a quiet month carries into a busy one.

The pricing page has an estimator that picks the cheapest plan for your volume by document type.

What it pays back

The ROI calculator uses one multiplication: orders a month, times the minutes saved on each, divided by 60, times your fully loaded hourly cost. The minutes saved are the time your team takes to key an order by hand, less the time a person still spends reviewing the draft. The calculator starts the review time at Fluent's measured median of 55 seconds, across thousands of documents customers reviewed in the 90 days to 1 September 2026.

Worked for the 400-order manufacturer, with two assumptions you should replace with your own: keying an order by hand takes 8 minutes, and an hour of order desk time costs $35 fully loaded.

Minutes saved per order8 minutes less 55 seconds, about 7.1 minutes
Minutes saved a month400 orders times 7.1, about 2,833 minutes
Hours back a monthAbout 47.2 hours
Labour saved a month47.2 hours at $35, about $1,653
Fluent at this volume$675 a month
Net a monthAbout $978

Long orders change the result more than anything else. An order desk that spends 20 minutes keying a 40-line distributor order saves far more per order than one keying a three-line order, so time your hardest customers.

Hidden costs to ask any vendor about

  • What counts as a billable order: a resent PO, a rejected order, a change order, each page of a long PDF.
  • Per-customer setup: whether a new customer's format needs a template, a map or a ticket to the vendor, and what it costs.
  • Approvers: whether people in pricing or credit need paid seats.
  • The cleanup cost: if orders are created in Kinetic before review, who deletes the ones that should never have existed.
  • Your Epicor administrator's time: what has to be installed, granted or maintained through upgrades.
  • Minimum term: monthly or annual, and what you owe if volume drops.

Customer results

StoneAge runs supplier pack slips and sales orders through Fluent on Epicor Kinetic. Its team checks each document instead of typing it, and its median review time on Receipt Entry is 9 seconds, measured over 30 days. Read the StoneAge customer story.

We started our implementation call at 4:30 yesterday. First sales orders processing by 4:50. Minimal mistakes out the box.

Richard Gardner · Group IT Director, Luceco

Price it on your own orders

The pricing page has the plans and the estimator, the ROI calculator prices the keying you still do by hand, and the order entry automation page covers how Fluent drafts sales orders for Order Entry. To compare vendors, read the best AI order entry software for Epicor Kinetic. To price Fluent on a batch of your own purchase orders, book a demo.

Frequently Asked Questions

Fluent's paid plans start at $600 a month, which covers roughly 357 sales orders at about 35 credits each. Above the plan, credits cost $0.05. Most other order-entry vendors quote on request.

About 35, according to the pricing page's estimate. Billing meters each order at the work it actually takes, so a long multi-line order draws more than a short one.

No. Users and agents are unlimited on every plan, so pricing, credit and customer service approvers cost nothing extra.

Multiply orders a month by the minutes saved on each, divide by 60, and multiply by your fully loaded hourly cost. Minutes saved are your keying time less review time; Fluent's measured median review is 55 seconds. The ROI calculator does the arithmetic.

No. There is no implementation project or services agreement. Technical setup is one 30-minute call, followed by a session that trains the people who review orders.

Yes. Invited teams start on a 30-day trial on one agent with a credit balance included, and pay only when the trial converts.

Read more

Ready to Save Hours Every Week?

Send us a batch of sample documents. Our Epicor specialists will show you what an agent can automate, and what still needs your judgment.