EDI vs AI Order Entry for Epicor Kinetic: Which Orders Belong Where
Is EDI dead? No, but it was never built for customers who email a PDF. How EDI and AI order entry differ, how to split customers between them, and how Fluent's approval workflows check every emailed order before it reaches Epicor.
Gonzalo Nuñez
Chief Technology Officer

EDI is not dead. Where a trading partner sends clean EDI, it is the right answer: deterministic, fast and reliable, with nothing to interpret. But EDI only covers the partners who will do it. The rest is the long tail: PDF and scanned purchase orders, email bodies, customer spreadsheets and portal exports, written with the customer's own part numbers, abbreviations and units. For many manufacturers and distributors that long tail is the majority of orders, not an edge case. AI order entry reads those documents and resolves them against your ERP, so the practical answer on Epicor Kinetic is both: EDI for the partners who send it, AI order entry for everyone else. Fluent is the AI half: it resolves each order against live Epicor data, runs deterministic checks, and routes it through approval workflows, with the AI flagging what each approver should check, before anything reaches Epicor.
What EDI does well
- Structure. An EDI purchase order arrives with every field in a known place, so nothing has to be read or interpreted.
- Volume. Once a partner is mapped, thousands of orders a week flow with little human touch.
- Requirement. Many large customers and retailers will only trade by EDI, and their compliance rules expect acknowledgements, advance ship notices and invoices in return.
Where EDI stops
- Every partner is a project. Each trading partner needs a map, testing and ongoing maintenance when their specification changes.
- Cost per partner. Provider fees and onboarding make sense for a customer who orders every day, and rarely for one who orders twice a month.
- The long tail never arrives. Many manufacturers have a handful of EDI partners and hundreds of customers who will never send EDI, and together those customers often send the majority of orders. Their orders are often still keyed by hand.
- Clean input in, clean input out. EDI delivers what the customer sent. A wrong part number or an outdated price is still wrong.
That often holds even where an EDI program is well run: the partners on EDI flow cleanly, and the orders from everyone else are still keyed into Order Entry by hand.
What AI order entry adds
AI order entry reads the document a customer actually sends, in any layout, with no template per customer. A good tool then does the part a person does after reading: it resolves the customer and ship-to, maps the customer's part numbers to yours, checks units of measure and prices against Epicor, and looks for an existing order with the same PO number. Whatever it cannot resolve is shown to a person before the order is committed.
Three things separate tools in this category. The first is depth against Epicor: whether customer part numbers, units and prices are resolved against live data or left to the reviewer. The second is when the tool creates the order: some create it in Kinetic straight away, on hold, while others keep a draft until it is approved. The guide to held orders and staged review covers the second question.
The third is what happens at sign-off. Fluent adds approval workflows before the order reaches Epicor: stages of approvers picked by name, by who is least busy, from a shared queue, or by the AI from a pool, with conditions written in plain language such as "first orders from a new customer". Before each approver opens the order, an approval agent reviews it for that approver's responsibility, checks Epicor read-only, and notes exactly what to look at. Approvers can decide by replying to the email, out-of-office approvers are routed to a delegate, and every decision is in the audit log.
Comparison
| EDI | AI order entry | |
|---|---|---|
| Input | Structured EDI transactions (for example 850 purchase orders) | PDFs, scans, photos, spreadsheets, email bodies; some tools also read XML and EDI |
| Setup per customer | A map per trading partner | None with a template-free tool |
| Best for | Large, stable, high-volume partners who require EDI | The long tail of customers who email orders |
| Validation against Epicor | Whatever the map and the integration check | Customer, parts, units, prices and duplicates, depending on the tool |
| Human review | Exceptions and rejected transactions | Every order, or only flagged ones, depending on your settings |
| Approval workflows | Outside the EDI standard; confirm with your EDI provider | Varies by tool; Fluent routes each order through staged approvers chosen by plain-language rules, with the AI reviewing it for each approver first |
| Ongoing work | Map maintenance when partners change | Written instructions for customer-specific handling |
| Return documents | Acknowledgements, ship notices and invoices by EDI | Not usually; confirm with the vendor |
Running both on Epicor Kinetic
Keep EDI where a customer sends it, and point every other order at the AI tool. Teams can keep their EDI customers out of Fluent so nothing is processed twice, or send EDI and XML orders through the same review queue so the order desk works one list and every order goes through the same approvals. Fluent reads the EDI and XML documents it is sent alongside PDFs and emails, so that choice is yours.
To split your customers:
- Pull three months of incoming orders and group them by customer and channel.
- Keep EDI for customers who require it or who send it already.
- Rank the rest by order volume and by how long each order takes to key.
- Start AI order entry on the top of that list, including the customers with their own part numbers and the ones who order in a different unit.
- Set the approvals before go-live: write who signs off on which orders in plain language, then test it by routing an order to two approvers, marking one out of office, and approving by replying to the email.
- Measure review time per order and lines resolved without correction, and move the next group of customers once the numbers hold.
Customer results
Metalworks, a family-owned manufacturer in Michigan on Epicor since 2010, runs its AP invoices through Fluent. Fluent connected to Epicor in a day, and reviewers rarely change a field it read. Keying an invoice took seven to eight minutes; reviewing the draft now takes under a minute, and an approval that took five minutes now takes seconds, from an email. “It’s like a breath of fresh air,” says Jill Schoedel, IT Manager.
StoneAge, an employee-owned maker of waterblast tools in Durango, Colorado, runs supplier pack slips into Receipt Entry and customer purchase orders into Order Entry through Fluent. Fluent connected to its Epicor in one 40-minute call. A receiver reviews a pack slip in a median of about ten seconds and customer service reviews a sales order in about a minute, where both used to key them by hand. A person approves every document before it posts.
See it on your own orders
Fluent drafts Order Entry from emailed purchase orders, resolved against live Epicor data and routed through approval workflows before anything is written. Read about order entry automation, the best EDI software for manufacturing ERP, or book a demo with a batch of your own orders.
Frequently Asked Questions
No. EDI remains the most reliable channel for large customers and retailers who require it. What has changed is the alternative for everyone else: AI order entry can now read emailed PDFs, spreadsheets and photos without a template per customer.
EDI exchanges structured transactions that are mapped once per trading partner. AI order processing reads unstructured documents such as PDFs and emails, then resolves what it read against your ERP for a person to review.
No, and it should not try. Where a partner sends clean EDI, keep it: the partner expects EDI acknowledgements, ship notices and invoices in return, and a deterministic transaction needs no reading. AI order entry is for the long tail, the customers who email PDFs, spreadsheets, scans and order lines in the email body, and for many manufacturers and distributors that long tail is the majority of orders. Fluent drafts those orders with no template per customer, resolves them against live Epicor data and routes each one through approval workflows before it reaches Epicor.
Yes. Fluent reads EDI and XML as well as PDFs, scans, photos, spreadsheets and email bodies, so every order can go through one review queue and the same approval workflows before it reaches Epicor Kinetic.
Use an AI order-entry tool that reads the document and resolves customers, parts, units and prices against live Epicor data. With Fluent, customers or your team forward the order to the agent, it drafts the sales order, and the approvers your written rules call for sign off, in the app or by replying to the email, before it is created in Order Entry. The AI reviews the order for each approver first and notes what to check.
Customers who require EDI, and high-volume partners already mapped and running cleanly. Everyone who emails orders is a candidate for AI order entry.


